FEFCO 0320 / Telescopic Setup & Gift Box 1:1 DXF · SVG · PDF Default Spec: 150 × 110 × 45 mm (T=1.2mm)

FEFCO 0320 Two-Piece Telescopic Lid & Base Gift Box Dieline Generator

1:1 CAD ENGINE READY

FEFCO 0320 Two-Piece Telescopic Lid & Base Gift Box Dieline Generator

1CAD Style & Material SetupPackaging

Select CAD Style / Model (36)Search & Filter

Material Stock Preset (Auto-Sets Caliper T & Kerf K)

Display Units

Reference Mode

2Dimensions (ID Mode)Millimeters (mm)

Internal Length (L)150 mm

Internal Width (W)110 mm

Internal Height / Flange (H)45 mm

Inside ID: 150×110×45mmOutside OD: 152.4×112.4×47.4mm

Thickness (T mm)

Laser Kerf (K mm)

3Brand Logo & 1:1 ExportZero Login

2D & 3D Brand Logo Mockup:

📤 Upload Logo

Print Artwork Bleed Guide:

Embed Spec Sheet & 50mm / 1" Scale Bars (Added on separate DIMENSIONS layer)

Pre-Flight Geometry Audit8/8 PASSED

PASS
Closed Outer Contours: 2 closed LWPOLYLINE cut loop(s) verified
PASS
Zero Duplicate Cut Paths: 24 unique segments (0 laser double-burns)
PASS
Flute & Kerf Tolerance Guard: T=1.20mm, K=0.000mm within structural limits
PASS
ISO Layer Color Separation: CUT (Red), CREASE (Blue), SCORE (Emerald), DIMENSIONS isolated
PASS
1:1 Physical Unit Header: Explicit mm/in SVG viewBox + DXF $INSUNITS=4 + 50mm PDF bar
PASS
Exact 2D Cut Bounding Parity: Cut Bounds 468.4×200mm === Blank Size
PASS
2D ↔ 3D Kinematic Model Sync: Archetype 'rigid_lid_base_box' synced (1 3D component(s))
PASS
True Vector Sheet Nesting Sync: 1:1 vector paths mapped to multi-up sheet grid

100%

CUT (1.64m) CREASE/SCORE (1.05m)● 2 Loops · Est. Cut: ~53s

1:1 Synced · Blank: 468.4 × 200 mm

2D 1:1 Unfolded Vector BlueprintBlank: 468.4 × 200 mm (18.44" × 7.87")

3D Interactive Fold & Orbit (Kraft Board)

80%

0%100%

Camera:

Yaw: -28°Pitch: 24°

⟳ Drag Anywhere to Rotate 3DL=150 × W=110 × H=45mm

BASE TRAY(150×110×45mm)

TELESCOPIC LID (+2T)Closure: 80%

Combined Set Footprint

468.4 × 200 mm

Base Blank (Part 1)

240.0 × 200.0 mm

Lid Blank (Part 2)

210.4 × 170.4 mm

Telescopic Clearance

+2.40 mm

Structural & Manufacturing Specification Summary

Quick Default Download: ↓ .DXF ↓ .SVG ↓ .PDF

The FEFCO 0320 Two-Piece Telescopic Lid and Base Box (also known as a Setup Box, Shoe Box, or Board Game Box) consists of a lower base tray and a slightly wider upper lid that telescopes smoothly over the base. Whether cut from chipboard/greyboard for luxury rigid boxes or folded from cardstock/corrugated board, the critical engineering requirement is the Telescopic Lid Clearance: the lid's internal length and width must exceed the base by +2T (plus wrap paper allowance) so the lid slides on with a slow air-cushioned release.

CUT LAYER #EF4444 (ACI 1)

CREASE / BEND #2563EB (ACI 5)

SCALE HEADER $INSUNITS=4 (1:1 mm)

SIMULATION 2D + 3D + Nesting

Pre-Calibrated Industry Sizes (1)

Standard Product Presets Built on This Lid & Base Gift Box (0320) Engine

295 × 295 × 70 mm (T=1.5mm)

Board Game Telescopic Box

295 x 295 x 70 mm (Standard 'Kallax-Friendly' Square Tabletop Board Game Box)

Load Preset Spec →

Structural Geometry & Allowances

Mathematical Blank & Tolerance Formulas

Telescopic Lid Length & Width Expansion

L_lid = L_base + max(1.5 mm, 2 * T) , W_lid = W_base + max(1.5 mm, 2 * T)

Automatically expands the upper lid footprint so it nests cleanly over the assembled lower base walls.

Base & Lid Flat Blank Dimensions

Blank_base = (L + 2H) x (W + 2H) , Blank_lid = (L_lid + 2H_lid) x (W_lid + 2H_lid)

Unfolds both the base tray and the telescopic lid side-by-side on a single 1:1 CAD drawing.

Pre-Press & Production SOP

Step-by-Step Export & Assembly Guide

1 Enter the internal Length (L), Width (W), and Height (H) of the lower base box, plus your board caliper thickness (T).
2 Inspect the combined 2-piece layout in the 2D blueprint (Part 1: Base on left, Part 2: Telescopic Lid on right).
3 Download the 1:1 .DXF, .SVG, or .PDF file.
4 Cut both blanks, fold the four walls up 90 degrees on both the base and lid, secure the corners with stay tape or glue flaps, and place the lid over the base.

Board Caliper, Laser & Die-Cutting Reference

Material Thickness, Creasing Matrix & Laser Kerf Settings

Material / Sheet Stock	Caliper Thickness (T)	Recommended Tooling / Laser Setup	Allowance / Kerf Spec	Primary Use Case
Rigid Greyboard / Chipboard (1000gsm – 1200gsm)	1.50 mm – 2.00 mm	V-Grooving or Corner-Cut + Thermal Stay Tape	Lid Clearance: +3.0mm (allows 120gsm art wrap paper)	iPhone-style electronics boxes, luxury watch & jewelry boxes, board games
Heavy Folding Cardstock (350gsm – 450gsm)	0.55 mm	Flatbed Die-Cut + Creasing Matrix	Lid Clearance: +1.5mm	Stationery sets, wedding invitation boxes, apparel gift boxes

Packaging & CNC Engineering FAQ

Frequently Asked Questions — Lid & Base Gift Box (0320)

Why does the lid need to be slightly larger than the base?

If the lid and base have identical dimensions, the lid walls will collide head-on with the base walls. Our generator automatically adds +2T (minimum 1.5mm) to the lid's length and width so it telescopes smoothly over the outside of the base.

How tall is the telescopic lid compared to the base?

By default, our generator sets the lid wall height to 65% of the base height, which provides an ergonomic finger grip along the bottom edge for easy two-handed opening.

Does the upper lid include thumb notches on the side walls?

Yes! Both the left and right side walls of the telescopic lid include semi-circular finger notches along the bottom edge so the user can grip the lower base tray even when the lid is fully closed.

Can I use this dieline for V-grooved rigid greyboard setup boxes?

Absolutely. When manufacturing 1.5mm–2.0mm rigid greyboard boxes wrapped in 128gsm art paper, set the Thickness (T) parameter to 1.6mm–2.0mm so the lid expansion accounts for both the greyboard caliper and the outer wrap paper turn-ins.

Topical Silo Navigation (Packaging Dielines)